How to

Step 1: Locate the stainless steel card to be engraved and note the dimensions

Step 2: Place the workpiece on the laser working field and adjust the focus of the laser module. Place the piece on a flat wooden surface that can be engraved

Step 3: On lightburn create a rectangle with the dimensions of the piece and set speed 3000 mm/min and power 30%. It will be used to engrave the wooden base and exactly position the object to be engraved.

Step 4: Position the writing and logo to be engraved inside the rectangle. We will engrave with three different shades of color; black, blue and yellow.

Attention: Colors may vary depending on the type and thickness of the material

Step 5: Set the parameters for the black color as in the photo

Step 6: Set the parameters for the blue color as in the photo

Step 7: Set the parameters for the blue color as in the photo

Step 8: Highlight only the rectangle and run the program by pressing the play button. Place the stainless steel card inside the engraving you just made

Attention: Be careful not to move the piece of wood or the laser module when positioning the piece

Step 9: Turn off the "Side" layer, and remember that you created a T1 layer frame area. Highlight the frame area of ​​the design you want to engrave and run the program.

Video Tutorial